Interior DIY

DIY Succulent Picture Frames

Succulents are now one of my all-time favorite plants and I am apparently not alone! No wonder, since they are extremely easy to care for and at the same time so beautiful to look at. These plants become a very special eye-catcher in this unusual planter: a disused picture frame. This turns your wall into a “Living Wall”!

This is what you need for the succulent picture frame

  • Picture frames, rabbit wire, household scissors
  • Tacker, screwdriver, 4 wooden strips
  • 1 sheet of plywood, hammer, nails
  • Picture hangers
  • Assembly adhesive for masonry and stone
  • Adhesive nail for wallpaper and plaster
  • For planting: succulents in different sizes and colors, cactus soil and moss

My tip: You can have the wooden strips and the plywood sheet cut to the appropriate size of the picture frame at the hardware store.

Step 1: First cut the rabbit wire with the scissors to the size of the picture frame. A little bit of wire should still stick out on all sides.

Step 2:  Turn the picture frame on its back and staple the wire to the inside edge of the frame. Make sure that the wire does not sag and that something is under tension. Once everything is in place, the excess wire edges are cut off.

Step 3: The wooden strips are attached to the back of the frame with the assembly adhesive from tesa. This creates a frame on the frame. To do this, apply the assembly adhesive over a large area and place the wooden strips on top. Press it down well and place a heavy object on it so that everything connects well.

Step 4: Once everything is dry, lay out the moss panels in the frame on the wire with the green side down. Also cover the edges well and seal everything.

Step 5:  Spread the cactus soil generously on the moss so that the frame is filled to the top. Shake it a little and then press it down. Then the plywood lid comes on. This can be glued on or attached with small nails.

Step 6: Carefully separate the succulent rosettes so that the longest possible root strands come out. Prick a planting hole with the screwdriver and insert the individual succulents. Turn a little and press in gently. Cut the wire a little for larger plants.

Tip: Alternate large and small plants and different shades of green.

Before putting the picture frame on the wall, lightly spray the plants with water. Then carefully lift the frame and see whether all the succulents hold up well. Once the picture hangers are in place, the frame can be attached to the wall using the adhesive nails.

Joy

How nice that you look over on my blog! Surely you are wondering who is actually behind Starshine Zone. I am Joy, 33 years old and my passion is DIY, gardening, and interior design.

http://starshinezone.com

Leave a Reply

Your email address will not be published. Required fields are marked *

Back To Top